Evaluation of Peroxidized Acetic Acid Disinfectant Proper Use Concentration and its Effect on Appearance of Chicken carcasses Quality

With the increase in consumer interest in food safety, in this study, we aimed to investigate the antibacterial effect of 50, 100, 150, and 200 ppm of peracetic acid (peracetic acid A, peracetic acid B, and peracetic acid) and sodium hypochlorite disinfectants on chicken carcasses and contaminated water, respectively, and changes in the appearance of chicken carcasses. Considering the antibacterial effect of each disinfectant concentration, the most significant antibacterial efficacy was observed for general bacteria and E. coli at 200 ppm regardless of disinfectant type. Considering the disinfectant type at 200 ppm, sodium hypochlorite was the least effective, and peracetic acid A showed the highest antibacterial efficacy at all concentrations. In chicken carcasses, 200 ppm of peracetic acid A exhibited the highest bacterial reduction rates of 92.7 and 89.3% for general bacteria and E. coli, respectively; in contaminated water, 200 ppm of peracetic acid A exhibited a significantly higher reduction rate (p<0.05). Salmonella was negative throughout the experiment, and discoloration of the neck and tip was observed for peracetic acid A and peracetic acid (Daesung) at 100 ppm and peracetic acid B at 150 ppm. Sodium hypochlorite did not cause discoloration at any concentration. Flavor analysis indicated that 100 ppm of peracetic acid A exhibited olfactory characteristics similar to those of 100 or 150 ppm of sodium hypochlorite. In conclusion, 50 ppm of peracetic acid A was adequate for use in poultry processing plants.